Brass Strip
Product Introduction
Brass Sheet fundatum in aere electrolytico, zinci et vestigii elementa ut materia rudis, per dispensando regulam, volvens calidum, volvens frigus, curatio caloris, purgatio superficiei, secans, consummatio, et tunc stipare.Processus materiales effectus, plasticitas, proprietas mechanica, resistentia corrosio, effectus et bonum stagni.Plerumque usus est in electrica, autocinetis, communicationibus, ferramentis, ornamentis et aliis industriis
Pelagus Technical Parametri
2-1Chemical Compositio
| Admisce No. | Compositio chemica (%,Max.) | ||||||||
| Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | immunditia | |
| H96 | 95.0-97.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H90 | 88.0-91.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H85 | 84.0-86.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H70 | 68.5-71.5 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H68 | 67.0-70.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H65 | 63.5-68.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H63 | 62.0-65.0 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 |
| H62 | 60.5-63.5 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 |
2-2 Admisce Tabula
| China | ISO | ASTM | JIS |
| H96 | CuZn5 | C21000 | C2100 |
| H90 | CuZn10 | C22000 | C2200 |
| H85 | CuZn15 | C23000 | C2300 |
| H70 | CuZn30 | C26000 | C2600 |
| H68 | ------ | ------- | ------ |
| H65 | CuZn35 | C27000 | C2700 |
| H63 | CuZn37 | C27200 | C2720 |
| H62 | CuZn40 | C28000 | C2800 |
2-3 Features
2-3-1 Specification Unit: mm
| Nomen | Alloy No. (Sina) | Ingenium | Magnitudo(mm) | ||
| Crassitudo | Latitudo | Longitudo | |||
| Brass Strip | quod | R | 4～8 | 600~1000 | ≤3000 |
| H62 H70 H90 H96
| Y Y2 M T | 0.2~0.49 | 600 | 1000~2000 | |
| 0.5~3.0 | 600~1000 | 1000~3000 | |||
Ingenium Mark:O.Mollis, 1/4H.1/4 Hard;1/2H.1/2 Ferreus, H.Durum: EH.Ultrahard.
2-3-2 Tolerantia Unit: mm
| Crassitudo | Latitudo | |||||
| Crassitudo sine declinatio ± | Latitudo sine declinatio ± | |||||
| <400 | <600 | <1000 | <400 | <600 | <1000 | |
| 0.5~0.8 | 0.035 | 0.041 | 0.093 | 0.3 | 0.3 | 1.5 |
| 0.8~1.2 | 0.041 | 0.093 | 0.093 | 0.3 | 0.5 | 1.5 |
| 1.2~2.0 | 0.041 | 0.093 | 0.100 | 0.3 | 0.5 | 2.5 |
| 2.0~3.2 | 0.093 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
Mechanica euismod
| Ingenium | Distrahentes fortitudo N/mm2 | Prolongatio ≥% | duritia HV | |
| M | (O) | ≥290 | 35 | ------ |
| Y4 | (1/4H) | 325-410 | 30 | 75-125 |
| Y2 | (1/2H) | 340-470 | 20 | 85-145 |
| Y | (H) | 390-630 | 10 | 105-175 |
| T | (EH) | ≥490 | 2.5 | ≥145 |
| R |
---
| --- | --- | |
Ingenium Mark:O.Mollis, 1/4H.1/4 Hard;1/2H.1/2 Ferreus, H.Durum: EH.Ultrahard.
Vestibulum Technique
