Brass Sheet
Product Introduction
Brass Sheet fundatur in aere electrolytico, zinci et vestigii elementis ut materia rudis, per processus per regulam, calidum volubilem, frigus volubilem, caloris curationem, superficies purgatio, sectio, consummatio, et tunc stipare. Processus materiales effectus, plasticitas, proprietas mechanica, resistentia corrosio, effectus et bonum stagni. Plerumque usus est in electrica, autocinetis, communicationibus, ferramentis, ornamentis et aliis industriis
Pelagus Technical Parametri
2-1Chemical Compositio
| Nomen | Admisce No. | Compositio chemica (%, Max.) | ||||||||
| Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | immunditia | ||
| Brass | H96 | 95.0-97.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H90 | 88.0-91.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H85 | 84.0-86.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H70 | 68.5-71.5 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H68 | 67.0-70.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H65 | 63.5-68.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H63 | 62.0-65.0 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 | |
| H62 | 60.5-63.5 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 | |
2-2 Admisce Tabula
| Nomen | China | ISO | ASTM | JIS |
| Brass | H96 | CuZn5 | C21000 | C2100 |
| H90 | CuZn10 | C22000 | C2200 | |
| H85 | CuZn15 | C23000 | C2300 | |
| H70 | CuZn30 | C26000 | C2600 | |
| H68 | --- | --- | --- | |
| H65 | CuZn35 | C27000 | C2700 | |
| H63 | CuZn37 | C27200 | C2720 | |
| H62 | CuZn40 | C28000 | C2800 |
2-3 Features
2-3-1Specification Unit: mm
| Nomen | Alloy No. (Sina) | Ingenium | Magnitudo(mm) | ||
| Crassitudo | Latitudo | Longitudo | |||
| Brass | quod | R | 4～8 | 600～1000 | ≤3000 |
| H62 | Y Y2 | 0.2～0.49 | 600 | 1000～2000 | |
| 0.5～3.0 | 600～1000 | 1000～3000 | |||
Ingenium Mark:O. Mollis, 1/4H. 1/4 Hard;1/2H. 1/2 Ferreus, H. Durum: EH. Ultrahard; R. Hot Rolled.
2-3-2 Tolerantia Unit: mm
| Crassitudo | Latitudo | |||||
| Crassitudo sine declinatio ± | Latitudo sine declinatio ± | |||||
| 400 | 600 | 1000 | 400 | 600 | 1000 | |
| 0.5~0.8 | 0.035 | 0.041 | 0.093 | 0.3 | 0.3 | 1.5 |
| 0.8~1.2 | 0.041 | 0.093 | 0.093 | 0.3 | 0.5 | 1.5 |
| 1.2~2.0 | 0.041 | 0.093 | 0.100 | 0.3 | 0.5 | 2.5 |
| 2.0~3.2 | 0.093 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
| Ingenium | distrahentes Fortitudo N/mm2 | Prolongatio ≥% | duritia HV | |
| M | (O) | ≥290 | 35 | --- |
| Y4 | (1/4H) | 325-410 | 30 | 75-125 |
| Y2 | (1/2H) | 340-470 | 20 | 85-145 |
| Y | (H) | 390-630 | 10 | 105-175 |
| T | (EH) | ≥490 | 2.5 | ≥145 |
| R | --- | --- | --- | |
Ingenium Mark:M. Mollis, Y4. 1/4 Hard;Y2. Durum, Y. Durum, T. Durus Ultraj.
Vestibulum Technique
